Wireless Shutter Release 4 Nikon D200 D300 D3 - $59

Wireless Shutter Release For Nikon D200 D300 D3 F5 F6 D2H D2Xs D1X, Fujifilm S3 Pro S5 Pro etc.

Introduction
This wireless shutter release has strong anti-interference function and has 16 channels for you to choose. It is extremely useful if there are several photographers working nearby. Each photographer could choose their own channel to trigger off the shutter release of the camera they are going to use without triggering others because of overlapping signals. You also can control more cameras with the channel switches on the transmitter and the receiver, and extra receivers if you need.

Wirelessly Trigger Your Camera's Shutter
Two-Level Shutter Button, Autofocus, Continuous Drive & Bulb Mode Supported Too!

You can activate autofocus, release shutter, activate continuous drive mode or keep the shutter open for bulb photography as well.

How to Use?
With the shutter button on the remote control, you can do the followings:

Autofocus:
Press it halfway to activates autofocus. (Indicated by Green LED)

Release Shutter:
Press it all the way to release shutter and take pictures. (Indicated by Red LED)

Continuous Drive:
1. Switch the camera to continuous drive mode.
2. Press it all the way to release shutter continuously.

Bulb Mode:
1. Switch the camera to Bulb mode.
2. Press it all the way for 3 seconds until the Red LED on the remote control goes off.
3. The receiver is in bulb mode now. (Indicated by Red LED on the receiver)
4. Press the button again to close the shutter.

Avoid Camera Vibration=Sharper Pictures!
Since you can trigger the shutter without touching the camera body, it can avoid camera vibration, thus resulting in sharper pictures.

Suitable For
Digital SLR: Nikon D200 D300 D3
Nikon D100 (must be used in combination with the MB-D100 multi-functional battery pack)
Nikon D1 / D1h / D1x
Nikon D2 / D2H / D2Hs / D2X
KODAK DCS Pro 14n DCS620
FUJI S3 Pro/S5 Pro
Film SLR
Nikon F6 Nikon F5 Nikon F100 Nikon F90 / F90x Nikon N90 / N90x